WinDETA has become
the laboratory standard control and evaluation software for
dielectric and impedance spectroscopy. It offers an uniform user
interface nearly independent of special hardware supporting the
most important dielectric or impedance analyzers
and temperature
controllers.
WinDETA performs automatically
the calibration procedures for the sample cells and allows dielectric and impedance
measurements up to four dimensions as a function of of frequency,
temperature, time, ac voltage or dc bias or any multi dimensional
combination.
The basic dielectric and
impedance parameters, like complex dielectric function, modulus,
conductivity, impedance etc., are evaluated and displayed graphically in
two and three dimensional representation.
Features
- Laboratory standard control
and evaluation multitasking software for dielectric and impedance
spectroscopy
- Uniform user interface for
several dielectric and
impedance analyzers and temperature controllers nearly independent of
hardware
- Flexible
experiment set-up: control of frequency, temperature
(WinTEMP option), ac voltage, dc bias and time in any multi
dimensional arrangement
- Evaluates over 30 different
electric quantities like e.g. permittivity, conductivity, inductance,
... from the measured impedance
- Graphical online display of
measured data in two or three dimensional diagrams (WinPLOT option),
temperature curve and system status
- Automatic calibration of
hardware devices and sample cells
- Ex- and imports data in
several flexible ASCII formats
- Optional curve fitting
software WinFIT for equivalent circuit
modelling, data transformations like WLF, Havriliak-Negami, and time
domain conversion
System requirements
MS Windows Version 7, Vista, XP, and 2000
GPIB interface cards from
Novocontrol (PCI or ISA) or National Instruments
Supported
dielectric / impedance
analyzers
NOTE: regular WinDETA licences include one single device driver,
i.e., one of the above listed analyzers is supported within a particular
license.
WinDETA
options
- WinTEMP option: Support
of temperature controlled measurements with drivers for all Novocontrol temperature control systems
and industrial controllers. It includes isothermal experiments from temperature lists and
/ or temperature lists with ramps. By combination several isothermal
temperatures and several ramps, any arbitrary temperature time dependence
can be programmed.
- WinPLOT option: Includes multiple curves in the
two dimensional graphics windows and three dimensional
diagrams.
- WinDETA All option:
Includes drivers for three different impedance analyzers instead of one in
a WinDETA license.
Home
